Patch Application Instructions

Our patches are laser-cut polyester material, not embroidered. All the pieces are held together with a temporary adhesive. If a piece moves out of position, just move it back before applying heat. The backing is also a temporary adhesive to help positioning on the surface.

-Patches must be ironed on
-Set Iron between wool and cotton
-Iron on a hard surface if possible
-Iron from the back or use a cover
cloth on top of patch
-DO NOT touch patch directly with Iron
-Use FIRM pressure for 20 seconds
-DO NOT move Iron around, but use iron like a heat press
-Check patch for adhesion
-Repeat if necessary